PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 00737 SHAPE 25 C/S SHAPE 164
00737 SHAPE 25 C/S SHAPE 164 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 00737 SHAPE 25 C/S SHAPE 164 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-126-5209, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
00737 SHAPE 25 C/S SHAPE 164
NSN: 5330-00-126-5209
FSC: 5330
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
Part Number00737 SHAPE 25 C/S SHAPE 164
NSN5330-00-126-5209
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 00737 SHAPE 25 C/S SHAPE 164 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96,CL B FED SPEC ALL MATERIAL RESPONSES OVERALL
•
APERTURE DIAMETER: 9.430 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.032 INCHES NOMINAL IN
•
MATERIAL: PAPER AND RUBBER SYNTHETIC OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 9.660 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96,CL B FED SPEC ALL MATERIAL RESPONSES OVERALL
APERTURE DIAMETER9.430 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.032 INCHES NOMINAL IN
MATERIALPAPER AND RUBBER SYNTHETIC OVERALL
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER9.660 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
33287Interchangeable
interchangeable cross-reference
interchangeable
7451572Interchangeable
interchangeable cross-reference
interchangeable
27093Interchangeable
interchangeable cross-reference
interchangeable
65001912Interchangeable
interchangeable cross-reference
interchangeable
00737 SHAPE 25 C/S SHAPE 164Interchangeable
interchangeable cross-reference
interchangeable
A39Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 00737 SHAPE 25 C/S SHAPE 164?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 00737 SHAPE 25 C/S SHAPE 164?
00737 SHAPE 25 C/S SHAPE 164 is a 00737 SHAPE 25 C/S SHAPE 164.
What parts can replace 00737 SHAPE 25 C/S SHAPE 164?
There are 10 known substitutes for 00737 SHAPE 25 C/S SHAPE 164: 33287, 7451572, 27093 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 00737 SHAPE 25 C/S SHAPE 164?
00737 SHAPE 25 C/S SHAPE 164 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-126-5209. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 00737 SHAPE 25 C/S SHAPE 164

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026