PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2708-1-2-2A
2708-1-2-2A ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.090 INCHES NOMINAL IN, diameter: 0.250 INCHES NOMINAL IN, material: STEEL OVERALL, head_style: FLAT CHAMFER, chamfer_length: 0.060 INCHES NOMINAL IN, style_designator: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3494, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2708-1-2-2A
NSN: 5315-00-010-3494
FSC: 5315
CAGE: 71843 — CLEVELAND HARDWARE AND FORGING COMPANY DBA FOX VALLEY FORGE (USA)
SPECIFICATIONS
height0.090 INCHES NOMINAL IN
diameter0.250 INCHES NOMINAL IN
materialSTEEL OVERALL
head_styleFLAT CHAMFER
chamfer_length0.060 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.370 INCHES NOMINAL IN
surface_treatmentCADMIUM OR ZINC OVERALL
under_head_length0.800 INCHES NOMINAL IN
first_hole_diameter0.076 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-010-3494
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2708-1-2-2A · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: CASEHARDENED
•
DIAMETER: 0.250 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 0.797 INCHES NOMINAL IN
•
HEAD STYLE: FLAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
PIN HEAD DIAMETER: 0.375 INCHES NOMINAL IN
•
FIRST HOLE DIAMETER: 0.0781 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDCASEHARDENED
DIAMETER0.250 INCHES NOMINAL IN
UNDER HEAD LENGTH0.797 INCHES NOMINAL IN
HEAD STYLEFLAT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
PIN HEAD DIAMETER0.375 INCHES NOMINAL IN
FIRST HOLE DIAMETER0.0781 INCHES NOMINAL IN
HEIGHT0.094 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
58981Interchangeable
interchangeable cross-reference
interchangeable
0033068Interchangeable
interchangeable cross-reference
interchangeable
P2766Interchangeable
interchangeable cross-reference
interchangeable
114783Interchangeable
interchangeable cross-reference
interchangeable
103494Interchangeable
interchangeable cross-reference
interchangeable
CS4730SR-0707Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2708-1-2-2A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2708-1-2-2A?
2708-1-2-2A is a PIN,STRAIGHT,HEADED.
What parts can replace 2708-1-2-2A?
There are 17 known substitutes for 2708-1-2-2A: 58981, 0033068, P2766 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2708-1-2-2A?
2708-1-2-2A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3494. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2708-1-2-2A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026