PartsTable
Technical Data Sheet
PartsTable / MRO / 103494
103494 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include height: 0.094 INCHES NOMINAL IN, diameter: 0.250 INCHES NOMINAL IN, material: STEEL COMP 1010 OR STEEL COMP B1111 OVERALL, head_style: FLAT, body_length: 0.859 INCHES NOMINAL IN, rating_method: WINDING TURNS SINGLE COMPONENT SINGLE WINDING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3494, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 103494
NSN: 5315-00-010-3494
FSC: 5315
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
height0.094 INCHES NOMINAL IN
diameter0.250 INCHES NOMINAL IN
materialSTEEL COMP 1010 OR STEEL COMP B1111 OVERALL
head_styleFLAT
body_length0.859 INCHES NOMINAL IN
rating_methodWINDING TURNS SINGLE COMPONENT SINGLE WINDING
turn_quantity6-1/2 SINGLE COMPONENT SINGLE WINDING
chamfer_length0.062 INCHES NOMINAL IN
coil_form_typeHOLLOW SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
overall_length1.171 INCHES NOMINAL IN
mounting_methodCORE AND THREADED STUD(S) SINGLE GROUP
NSN5315-00-010-3494
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 103494 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: CASEHARDENED
•
DIAMETER: 0.250 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 0.797 INCHES NOMINAL IN
•
HEAD STYLE: FLAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
PIN HEAD DIAMETER: 0.375 INCHES NOMINAL IN
•
FIRST HOLE DIAMETER: 0.0781 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDCASEHARDENED
DIAMETER0.250 INCHES NOMINAL IN
UNDER HEAD LENGTH0.797 INCHES NOMINAL IN
HEAD STYLEFLAT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
PIN HEAD DIAMETER0.375 INCHES NOMINAL IN
FIRST HOLE DIAMETER0.0781 INCHES NOMINAL IN
HEIGHT0.094 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
58981Interchangeable
interchangeable cross-reference
interchangeable
0033068Interchangeable
interchangeable cross-reference
interchangeable
P2766Interchangeable
interchangeable cross-reference
interchangeable
114783Interchangeable
interchangeable cross-reference
interchangeable
103494Interchangeable
interchangeable cross-reference
interchangeable
CS4730SR-0707Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 103494?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 103494?
103494 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 103494?
There are 18 known substitutes for 103494: 58981, 0033068, P2766 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 103494?
103494 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3494. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 103494

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026