Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, cut_type: RECTANGULAR OVERALL, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT OVERALL, peripheral_diameter: 1.620 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN, center_hole_diameter: 1.500 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-071-4634, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2641-405-01 ITEM 71CP
NSN:5330-01-071-4634 FSC:5330 CAGE:03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
angle
25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
cut_type
RECTANGULAR OVERALL
material
PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_type
SCARF-BUTT OVERALL
peripheral_diameter
1.620 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN
center_hole_diameter
1.500 INCHES NOMINAL IN
distance_between_ends
0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
cross-sectional_height
0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
cross-sectional_thickness
0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
cross-sectional_shape_style
SQUARE
departure_from_cited_document
CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justification
ZZZW
NSN
5330-01-071-4634
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
JOINT TYPE: SCARF-BUTT OVERALL
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CUT TYPE: RECTANGULAR OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.620 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE
SQUARE
MATERIAL
PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPE
SCARF-BUTT OVERALL
DEPARTURE FROM CITED DOCUMENT
CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CUT TYPE
RECTANGULAR OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2641-405-01 ITEM 71CP?
2641-405-01 ITEM 71CP is a RETAINER,PACKING.
What parts can replace 2641-405-01 ITEM 71CP?
There are 11 known substitutes for 2641-405-01 ITEM 71CP: SAE-AS8791, 011222EL, 982199 and 8 more. Substitute compatibility should be verified for your specific system.
Is 2641-405-01 ITEM 71CP still available?
2641-405-01 ITEM 71CP is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.