PartsTable
Technical Data Sheet
Download PDF

2607-20 — DRILL-DRIVER,ELECTRIC,PORTABLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2607-20: DRILL-DRIVER,ELECTRIC,PORTABLE.

The DRILL-DRIVER,ELECTRIC,PORTABLE is a the manufacturer industrial component. Key specifications include overall_length: 7.75 INCHES NOMINAL IN, voltage_rating: 18.0 VOLTS NOMINAL, size_designator: 0.50 INCHES NOMINAL IN, torque_capacity: 500.0 INCH-POUNDS NOMINAL IN, special_features: 4-POLE FRAMELESS MOTOR; ALL METAL GEAR CASE AND CHUCK; WEIGHT 3 POUNDS LBS, features_provided: CORDLESS AND REVERSIBLE. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-816-3546, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2607-20
NSN: 5331-00-816-3546
NIINs: 008163546, 016611497
FSC: 5331 — O-ring
CAGE: 94592 — FLUID CONDITIONING PRODUCTS, INC. (USA)
SPECIFICATIONS
overall_length7.75 INCHES NOMINAL IN
voltage_rating18.0 VOLTS NOMINAL
size_designator0.50 INCHES NOMINAL IN
torque_capacity500.0 INCH-POUNDS NOMINAL IN
special_features4-POLE FRAMELESS MOTOR; ALL METAL GEAR CASE AND CHUCK; WEIGHT 3 POUNDS LBS
features_providedCORDLESS AND REVERSIBLE
nominal_chuck_size0.50 INCHES IN
no_load_speed_in_rpm1800.0 MAXIMUM
part_name_assigned_by_controlling_agencyHAMMER DRILL/DRIVER (BARE TOOL)
NSN5331-00-816-3546
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2607-20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.689 INCHES MINIMUM AND 1.733 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.689 INCHES MINIMUM AND 1.733 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 9
M383-20Reference document
Same NSN cross-reference
Reference document — Secondary reference
10596841-13Reference document
Same NSN cross-reference
Reference document — Secondary reference
128250Reference document
Same NSN cross-reference
Reference document — Secondary reference
257R21REVAPC23Reference document
Same NSN cross-reference
Reference document — Secondary reference
7799-20Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2251-20Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 2607-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2607-20?
2607-20 is a DRILL-DRIVER,ELECTRIC,PORTABLE.
What parts can replace 2607-20?
There are 9 known substitutes for 2607-20: M383-20, 10596841-13, 128250 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2607-20?
2607-20 is cataloged in the U.S. Government catalog under NSN 5331-00-816-3546. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2607-20