PartsTable
Technical Data Sheet
PartsTable / O-RING / 7799-20
7799-20 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The VIBRATOR,IGNITION COIL is a the manufacturer industrial component. Key specifications include overall_width: 2.380 INCHES NOMINAL IN, overall_height: 6.500 INCHES NOMINAL IN, overall_length: 11.047 INCHES NOMINAL IN, fsc_application_data: ENGINE ELECTRICAL SYSTEM COMPONENTS,AIRCRAFT, end_item_identification: E/I TF33-P-3/5/9/11A ENGINE A, part_name_assigned_by_controlling_agency: ORIGINAL NAME EXCITER,IGNITION. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-816-3546, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7799-20
NSN: 5331-00-816-3546
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
overall_width2.380 INCHES NOMINAL IN
overall_height6.500 INCHES NOMINAL IN
overall_length11.047 INCHES NOMINAL IN
fsc_application_dataENGINE ELECTRICAL SYSTEM COMPONENTS,AIRCRAFT
end_item_identificationE/I TF33-P-3/5/9/11A ENGINE A
part_name_assigned_by_controlling_agencyORIGINAL NAME EXCITER,IGNITION
reference_number_differentiating_characteristicsAS DIFFERENTIATED BY SOURCE CONTROL DRAWING NO. 779920
NSN5331-00-816-3546
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7799-20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 1.689 INCHES MINIMUM AND 1.733 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.465 INCHES MINIMUM AND 1.485 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER1.689 INCHES MINIMUM AND 1.733 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
906-20-739-90Interchangeable
interchangeable cross-reference
interchangeable
3-20N168-8Interchangeable
interchangeable cross-reference
interchangeable
STSPK300-20Interchangeable
interchangeable cross-reference
interchangeable
225120Interchangeable
interchangeable cross-reference
interchangeable
5330008037208Interchangeable
interchangeable cross-reference
interchangeable
GHN10093-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7799-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7799-20?
7799-20 is a VIBRATOR,IGNITION COIL.
What parts can replace 7799-20?
There are 24 known substitutes for 7799-20: 906-20-739-90, 3-20N168-8, STSPK300-20 and 21 more. Substitute compatibility should be verified for your specific system.
Is 7799-20 still available?
7799-20 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7799-20

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026