PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2575-6
2575-6 ✓ Verified by PartsTable
Clementoni · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE, body_width: 1.062 INCHES NOMINAL IN, body_height: 0.812 INCHES NOMINAL IN, body_length: 1.250 INCHES NOMINAL IN, design_form: PREBENT, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-402-9511, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2575-6
NSN: 4720-00-402-9511
FSC: 4720
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR TUBE
body_width1.062 INCHES NOMINAL IN
body_height0.812 INCHES NOMINAL IN
body_length1.250 INCHES NOMINAL IN
design_formPREBENT
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B SINGLE END
exterior_colorBLACK
inclosure_typePARTIALLY INCLOSED, DOUBLE SHELL
vacuum_in_torr50.8
wall_thickness0.022 INCHES NOMINAL IN
inside_diameter0.375 INCHES NOMINAL IN
NSN4720-00-402-9511
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 2575-6 · Clementoni ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATING PRESSURE: 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
HYDROSTATIC TEST PRESSURE: 400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
MATERIAL: RUBBER SYNTHETIC TUBE
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES IN
•
BURST TEST PRESSURE: 800.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
OPERATING PRESSURE200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
HYDROSTATIC TEST PRESSURE400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MATERIALRUBBER SYNTHETIC TUBE
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
MINIMUM INSIDE BENDING RADIUS4.000 INCHES IN
BURST TEST PRESSURE800.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
END ITEM IDENTIFICATIONGRUMMAN A-10 AIRCRAFT
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
61-064Interchangeable
interchangeable cross-reference
interchangeable
VT150Interchangeable
interchangeable cross-reference
interchangeable
5008Interchangeable
interchangeable cross-reference
interchangeable
U5R772-339Interchangeable
interchangeable cross-reference
interchangeable
LM723H/883CInterchangeable
interchangeable cross-reference
interchangeable
HL22596Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2575-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2575-6?
2575-6 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Clementoni.
What parts can replace 2575-6?
There are 21 known substitutes for 2575-6: 61-064, VT150, 5008 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2575-6?
2575-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-402-9511. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2575-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026