PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 134MKC1

134MKC1 — Technical Data Sheet

✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

CLAMP,CABLE,ELECTRICAL CONNECTOR. Key specifications include material: RUBBER SYNTHETIC TUBE, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, inside_diameter: 0.380 INCHES NOMINAL IN, outside_diameter: 0.620 INCHES NOMINAL IN, special_features: 160 DEG F MAX TEMP RATING FOR AIR APPLICATIONS DEGF, operating_pressure: 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-402-9511, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
134MKC1
NSN: 4720-00-402-9511
FSC: 4720
CAGE: 556A6 — LINDE MATERIAL HANDLING NORTH AMERICA CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC TUBE
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
inside_diameter0.380 INCHES NOMINAL IN
outside_diameter0.620 INCHES NOMINAL IN
special_features160 DEG F MAX TEMP RATING FOR AIR APPLICATIONS DEGF
operating_pressure200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
burst_test_pressure800.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
end_item_identificationGRUMMAN A-10 AIRCRAFT
inside_surface_conditionSMOOTH
media_for_which_designedFUEL/OIL, HYDROCARBON SINGLE RESPONSE
hydrostatic_test_pressure400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
cross-sectional_shape_styleROUND
NSN4720-00-402-9511
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 134MKC1 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATING PRESSURE: 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
TEMP RATING: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
HYDROSTATIC TEST PRESSURE: 400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
MATERIAL: RUBBER SYNTHETIC TUBE
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
MINIMUM INSIDE BENDING RADIUS: 4.000 INCHES IN
•
BURST TEST PRESSURE: 800.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
OPERATING PRESSURE200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TEMP RATING-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
HYDROSTATIC TEST PRESSURE400.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
MATERIALRUBBER SYNTHETIC TUBE
MEDIA FOR WHICH DESIGNEDFUEL/OIL, HYDROCARBON SINGLE RESPONSE
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
MINIMUM INSIDE BENDING RADIUS4.000 INCHES IN
BURST TEST PRESSURE800.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
END ITEM IDENTIFICATIONGRUMMAN A-10 AIRCRAFT
OUTER COVERING ENVIRONMENTAL PROTECTIONABRASION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
61-064Interchangeable
interchangeable cross-reference
interchangeable
VT150Interchangeable
interchangeable cross-reference
interchangeable
5008Interchangeable
interchangeable cross-reference
interchangeable
U5R772-339Interchangeable
interchangeable cross-reference
interchangeable
LM723H/883CInterchangeable
interchangeable cross-reference
interchangeable
HL22596Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 134MKC1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 134MKC1?
134MKC1 is a CLAMP,CABLE,ELECTRICAL CONNECTOR.
What parts can replace 134MKC1?
There are 20 known substitutes for 134MKC1: 61-064, VT150, 5008 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 134MKC1?
134MKC1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-402-9511. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 134MKC1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026