The Insulation,vehicular, cataloged under National Stock Number 2540-01-534-7627, is classified within Federal Supply Class 2540 (Vehicular Furniture and Accessories) of the Vehicular Equipment Components group. The manufacturer of record is Cnh Industrial America Llc Dba Cnh America. Government technical data includes 1 specification, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Item Name | Insulation,vehicular |
| FSC / FSG | 2540 — Vehicular Furniture and Accessories (FSG 25) |
| Manufacturers | Amey Fleet Services Ltd (CAGE K5597); Cnh Industrial America Llc Dba Cnh America (CAGE 10988) |
| Parameter | Value |
|---|---|
| NSN | 2540-01-534-7627 |
| Primary Part Number | 236233A2 |
| Item Name | Insulation,vehicular |
| FSC / FSG | 2540 / 25 — Vehicular Furniture and Accessories |
| Manufacturer | Cnh Industrial America Llc Dba Cnh America |
| Status | ACTIVE |
| Color | GRAY/GREY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
NSN 2540-01-534-7627 is a Insulation,vehicular, manufactured by Cnh Industrial America Llc Dba Cnh America, classified under FSC 2540, Vehicular Furniture and Accessories. Status: active.
NSN 2540-01-534-7627 has 2 manufacturer part numbers on file: 236233A2 (Amey Fleet Services Ltd), 236233A2 (Cnh Industrial America Llc Dba Cnh America).
Key specifications for 236233A2: Overall Width: 331.0 MILLIMETERS NOMINAL MM; Color: GRAY/GREY; Special Features: MATERIAL ACCOUSTICAL FOAM POLYETHER/POLYESTER BLEND; MUST PASS FLAMMABILITY REQUIREMENTS OF FMVSS-302; COLOR CHARCOAL GREY; VINYL GENCORP 40142600 OR UNIROYAL UN-56 CASE SPEC-MS-40-10 TRIM GRAY LIGHT NON-EXPANDED W/KNITBACK PER MS 565 GRADE 1; PERFORATIONS 18 PCT OPEN AREA, 113 HOLES/SQ IN, 1.14 DIA HOLES; VINYL TO BE FLAME LAMINATED TO FOAM, MUST PRODUCE A FOAM TEARING BOND; PRESSURE SENSITIVE AADHESIVE W/A 1.5 MIL MYLAR CARRIER AFTER BEING BONDED TO A PAINTED STEEL TEST PANEL FOR A MINIMUM OF 24 HRS, THE ADHESIVE MUST MEET THE FOLLOWING REQUIREMENTS INITIAL ADHESION BOND WILL BE EQUAL TO STRENGTH OF ACQUSTICAL FOAM; SOME TEARING OF FOAM IS REQUIRED AT 22 DEG C; HEAT RESISTANCE PART SHALL REMAIN ENTIRELY ADHERED TO PAINTED SURFACE AFTER 8 HRS AT 100 DEG C IN VERTICAL POSITION; WATER RESISTANCE PART SHALL REMAIN ENTIRELY ADHERED AFTER 22 HRS IN WATER AT 22 DEG C; PRESSURE SENSITIVE ADHESIVE TO HAVE SILICON TREATED RELEASE PAPER DEGC; Part Name Assigned by Controlling Agency: PANEL DOOR INSULATION. 1 specification is documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.