236233A2: INSULATION,VEHICULAR.
The INSULATION,VEHICULAR is a the manufacturer industrial component. Key specifications include overall_width: 331.0 MILLIMETERS NOMINAL MM, part_name_assigned_by_controlling_agency: PANEL DOOR INSULATION. This part is cataloged in the U.S.
Government catalog under NSN 2540-01-534-7627, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| overall_width | 331.0 MILLIMETERS NOMINAL MM |
| part_name_assigned_by_controlling_agency | PANEL DOOR INSULATION |
| NSN | 2540-01-534-7627 |
| OVERALL WIDTH | 331.0 MILLIMETERS NOMINAL MM |
| COLOR | GRAY/GREY |
| SPECIAL FEATURES | MATERIAL ACCOUSTICAL FOAM POLYETHER/POLYESTER BLEND; MUST PASS FLAMMABILITY REQUIREMENTS OF FMVSS-302; COLOR CHARCOAL GREY; VINYL GENCORP 40142600 OR UNIROYAL UN-56 CASE SPEC-MS-40-10 TRIM GRAY LIGHT NON-EXPANDED W/KNITBACK PER MS 565 GRADE 1; PERFORATIONS 18 PCT OPEN AREA, 113 HOLES/SQ IN, 1.14 DIA HOLES; VINYL TO BE FLAME LAMINATED TO FOAM, MUST PRODUCE A FOAM TEARING BOND; PRESSURE SENSITIVE AADHESIVE W/A 1.5 MIL MYLAR CARRIER AFTER BEING BONDED TO A PAINTED STEEL TEST PANEL FOR A MINIMUM OF 24 HRS, THE ADHESIVE MUST MEET THE FOLLOWING REQUIREMENTS INITIAL ADHESION BOND WILL BE EQUAL TO STRENGTH OF ACQUSTICAL FOAM; SOME TEARING OF FOAM IS REQUIRED AT 22 DEG C; HEAT RESISTANCE PART SHALL REMAIN ENTIRELY ADHERED TO PAINTED SURFACE AFTER 8 HRS AT 100 DEG C IN VERTICAL POSITION; WATER RESISTANCE PART SHALL REMAIN ENTIRELY ADHERED AFTER 22 HRS IN WATER AT 22 DEG C; PRESSURE SENSITIVE ADHESIVE TO HAVE SILICON TREATED RELEASE PAPER DEGC |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PANEL DOOR INSULATION |
No substitute or cross-reference records for this part.