The Pin,molded, cataloged under National Stock Number 2530-01-630-3036, is classified within Federal Supply Class 2530 (Vehicular Brake, Steering, Axle, Wheel, and Track Components) of the Vehicular Equipment Components group. The manufacturer of record is Loc Performance Products Llc Dba American Rheinmetall. Government technical data includes 5 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2530-01-630-3036 |
| Primary Part Number | 12556913 |
| Item Name | Pin,molded |
| FSC / FSG | 2530 / 25 — Vehicular Brake, Steering, Axle, Wheel, and Track Components |
| Manufacturer | Loc Performance Products Llc Dba American Rheinmetall |
| Status | ACTIVE |
| Overall Diameter | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN |
| General Characteristics Item Description | GROOVE QUANTITY: 6; GROOVE DIAMETER: 1.248" ALL GROOVES; MOUNTING METHOD: INTEGRAL; MOUNTING FACILITY QUANTITY: 2; GROOVE LENGTH: 1.7" NOMINAL; GROOVE DEPTH: 0.3135" NOMINAL; GROOVE LOCATION: OVERALL; FEATURES PROVIDED: FORMED |
| Special Test Features | FOR IN PROCESS INSPECTION AND PRODUCTION CONTROL UTILIZE TABLE III OF MIL-DTL-11891; TEST FREQUENCIES PER MIL-DTL-11891; TESTS TO BE PERFORMED INCLUDE: SPECIFIC GRAVITY I/A/W ASTM D792; HARDNES I/A/W ASTM D2240; TENSILE STRENGTH I/A/W ASTM D412; TENSILE STRENGTH (AGED) I/A/W ASTM D573; ULTIMATE ELONGATION I/A/W ASTM D412; TENSILE STRESS AT 200% STRAIN (MODULUS) I/A/W ASTM D412; THERMOGRAVIMETRIC ANALYSIS I/A/W ASTM E1131; VULCANIZATION USING OSCILLATING DISK CURE METER I/A/W ASTM D2084; ADHESION I/A/W ASTM D429; COMPRESSION SET I/A/W ASTM D395; BRITTLENESS POINT OF FLEXIBLE POLYMERS I/A/W ASTM D2137 GC MASS SPEC |
| Supplementary Features | MATERIAL: COMPOUND SM07884; PIN ASSEMBLY MUST MEET A 4000 MILE LIFE USING 20% FAILURE CRITERIA PER VEHICLE SET WHILE BEING TESTED ON A 68,500 LBS M109A6; THE PIN ASSEMBLY MILEAGE SPECIFIED REQUIRES THAT EVERY 1,000 MILES THE STRANDS SWITCH VEHICLE SIDES; TESTING IS TO BE I/A/W TRADOC OPERATION MODE LBS |
| Specification/standard Data | 05047-ASME Y14.100-2004 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 05047-ASME Y14.5M-1994 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
NSN 2530-01-630-3036 is a Pin,molded, manufactured by Loc Performance Products Llc Dba American Rheinmetall, classified under FSC 2530, Vehicular Brake, Steering, Axle, Wheel, and Track Components. Status: active.
NSN 2530-01-630-3036 has 2 manufacturer part numbers on file: 12556913 (U S Army Tank Automotive Command Amsta-Im-Mm), 12556913 (Loc Performance Products Llc Dba American Rheinmetall).
Key specifications for 12556913: Overall Diameter: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN; General Characteristics Item Description: GROOVE QUANTITY: 6; GROOVE DIAMETER: 1.248" ALL GROOVES; MOUNTING METHOD: INTEGRAL; MOUNTING FACILITY QUANTITY: 2; GROOVE LENGTH: 1.7" NOMINAL; GROOVE DEPTH: 0.3135" NOMINAL; GROOVE LOCATION: OVERALL; FEATURES PROVIDED: FORMED; Special Test Features: FOR IN PROCESS INSPECTION AND PRODUCTION CONTROL UTILIZE TABLE III OF MIL-DTL-11891; TEST FREQUENCIES PER MIL-DTL-11891; TESTS TO BE PERFORMED INCLUDE: SPECIFIC GRAVITY I/A/W ASTM D792; HARDNES I/A/W ASTM D2240; TENSILE STRENGTH I/A/W ASTM D412; TENSILE STRENGTH (AGED) I/A/W ASTM D573; ULTIMATE ELONGATION I/A/W ASTM D412; TENSILE STRESS AT 200% STRAIN (MODULUS) I/A/W ASTM D412; THERMOGRAVIMETRIC ANALYSIS I/A/W ASTM E1131; VULCANIZATION USING OSCILLATING DISK CURE METER I/A/W ASTM D2084; ADHESION I/A/W ASTM D429; COMPRESSION SET I/A/W ASTM D395; BRITTLENESS POINT OF FLEXIBLE POLYMERS I/A/W ASTM D2137 GC MASS SPEC; Supplementary Features: MATERIAL: COMPOUND SM07884; PIN ASSEMBLY MUST MEET A 4000 MILE LIFE USING 20% FAILURE CRITERIA PER VEHICLE SET WHILE BEING TESTED ON A 68,500 LBS M109A6; THE PIN ASSEMBLY MILEAGE SPECIFIED REQUIRES THAT EVERY 1,000 MILES THE STRANDS SWITCH VEHICLE SIDES; TESTING IS TO BE I/A/W TRADOC OPERATION MODE LBS. 5 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.