12556913: PIN,MOLDED.
The PIN,MOLDED is a the manufacturer industrial component. Key specifications include overall_length: 14.937 INCHES MINIMUM AND 15.081 INCHES MAXIMUM IN, overall_diameter: 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN, special_features: USED ON: M109A6 AND M992A2, end_item_identification: 2350-01-305-0028, part_name_assigned_by_controlling_agency: T154M PIN, MOLDED. This part is cataloged in the U.S.
Government catalog under NSN 2530-01-630-3036, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| overall_length | 14.937 INCHES MINIMUM AND 15.081 INCHES MAXIMUM IN |
| overall_diameter | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN |
| special_features | USED ON: M109A6 AND M992A2 |
| end_item_identification | 2350-01-305-0028 |
| specification/standard_data | 05047-ASME Y14.100-2004 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 05047-ASME Y14.5M-1994 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| part_name_assigned_by_controlling_agency | T154M PIN, MOLDED |
| NSN | 2530-01-630-3036 |
| OVERALL DIAMETER | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM IN |
| GENERAL CHARACTERISTICS ITEM DESCRIPTION | GROOVE QUANTITY: 6; GROOVE DIAMETER: 1.248" ALL GROOVES; MOUNTING METHOD: INTEGRAL; MOUNTING FACILITY QUANTITY: 2; GROOVE LENGTH: 1.7" NOMINAL; GROOVE DEPTH: 0.3135" NOMINAL; GROOVE LOCATION: OVERALL; FEATURES PROVIDED: FORMED |
| SPECIAL TEST FEATURES | FOR IN PROCESS INSPECTION AND PRODUCTION CONTROL UTILIZE TABLE III OF MIL-DTL-11891; TEST FREQUENCIES PER MIL-DTL-11891; TESTS TO BE PERFORMED INCLUDE: SPECIFIC GRAVITY I/A/W ASTM D792; HARDNES I/A/W ASTM D2240; TENSILE STRENGTH I/A/W ASTM D412; TENSILE STRENGTH (AGED) I/A/W ASTM D573; ULTIMATE ELONGATION I/A/W ASTM D412; TENSILE STRESS AT 200% STRAIN (MODULUS) I/A/W ASTM D412; THERMOGRAVIMETRIC ANALYSIS I/A/W ASTM E1131; VULCANIZATION USING OSCILLATING DISK CURE METER I/A/W ASTM D2084; ADHESION I/A/W ASTM D429; COMPRESSION SET I/A/W ASTM D395; BRITTLENESS POINT OF FLEXIBLE POLYMERS I/A/W ASTM D2137 GC MASS SPEC |
| SUPPLEMENTARY FEATURES | MATERIAL: COMPOUND SM07884; PIN ASSEMBLY MUST MEET A 4000 MILE LIFE USING 20% FAILURE CRITERIA PER VEHICLE SET WHILE BEING TESTED ON A 68,500 LBS M109A6; THE PIN ASSEMBLY MILEAGE SPECIFIED REQUIRES THAT EVERY 1,000 MILES THE STRANDS SWITCH VEHICLE SIDES; TESTING IS TO BE I/A/W TRADOC OPERATION MODE LBS |
| OVERALL LENGTH | 14.937 INCHES MINIMUM AND 15.081 INCHES MAXIMUM IN |
| SPECIFICATION/STANDARD DATA | 05047-ASME Y14.100-2004 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD AND 05047-ASME Y14.5M-1994 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SPECIAL FEATURES | USED ON: M109A6 AND M992A2 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | T154M PIN, MOLDED |
| END ITEM IDENTIFICATION | 2350-01-305-0028 |
No substitute or cross-reference records for this part.