PartsTable
Technical Data Sheet
24196 ✓ Verified by PartsTable
Esselte · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SOCKET,PLUG-IN ELECTRONIC COMPON. Key specifications include phase: THREE, material: RUBBER SYNTHETIC, duty_cycle: CONTINUOUS, ambient_temp: 50.0 CELSIUS DEGC, control_type: LOCAL, power_rating: 10.000 HORSEPOWER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-196-5568, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
24196
NSN: 5331-00-196-5568
FSC: 5331 — O-RING
CAGE: 16004 — DAVEY COMPRESSOR CO DIV OF KECO INDUSTRIES INC (USA)
SPECIFICATIONS
phaseTHREE
materialRUBBER SYNTHETIC
duty_cycleCONTINUOUS
ambient_temp50.0 CELSIUS DEGC
control_typeLOCAL
power_rating10.000 HORSEPOWER
overall_width8.500 INCHES NOMINAL IN
overall_height7.000 INCHES NOMINAL IN
overall_length13.000 INCHES NOMINAL IN
mounting_methodTERMINAL
size_designator1
terminal_length0.500 INCHES MINIMUM IN
NSN5331-00-196-5568
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 24196 MFR: Esselte ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
CENTER HOLE DIAMETER: 2.710 INCHES MINIMUM AND 2.740 INCHES MAXIMUM IN
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.710 INCHES MINIMUM AND 2.740 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
24196Interchangeable
interchangeable cross-reference
interchangeable
SU2316Interchangeable
interchangeable cross-reference
interchangeable
FD1739Interchangeable
interchangeable cross-reference
interchangeable
LU11-01Interchangeable
interchangeable cross-reference
interchangeable
LU 11-1Interchangeable
interchangeable cross-reference
interchangeable
2106-06-00-2520NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 24196?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 24196?
24196 is a SOCKET,PLUG-IN ELECTRONIC COMPON manufactured by Esselte.
What parts can replace 24196?
There are 10 known substitutes for 24196: 24196, SU2316, FD1739 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 24196?
24196 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-196-5568. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 24196