PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 232250-7
232250-7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.1875 INCHES NOMINAL IN, overall_width: 0.3750 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: OIL HOLE IN OUTER RACE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-6130, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
232250-7
NSN: 3110-00-554-6130
FSC: 3110
CAGE: 13989 — FAIRCHILD CAMERA AND INSTRUMENT CORP ELECTRONIC DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.1875 INCHES NOMINAL IN
overall_width0.3750 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresOIL HOLE IN OUTER RACE
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.3437 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-554-6130
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 232250-7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
RETAINER FABRICATION METHOD: PRESSED
•
OVERALL OUTSIDE DIAMETER: 0.3437 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 0.1875 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
RETAINER FABRICATION METHODPRESSED
OVERALL OUTSIDE DIAMETER0.3437 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SURFACE FINISHGROUND
BORE DIAMETER0.1875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
SPECIAL FEATURESOIL HOLE IN OUTER RACE
OVERALL WIDTH0.3750 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
180013Interchangeable
interchangeable cross-reference
interchangeable
N10026PC134Interchangeable
interchangeable cross-reference
interchangeable
K8982264Interchangeable
interchangeable cross-reference
interchangeable
A50036Interchangeable
interchangeable cross-reference
interchangeable
A-A-1955Interchangeable
interchangeable cross-reference
interchangeable
FF-H-571Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 232250-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 232250-7?
232250-7 is a BEARING,ROLLER,NEEDLE.
What parts can replace 232250-7?
There are 27 known substitutes for 232250-7: 180013, N10026PC134, K8982264 and 24 more. Substitute compatibility should be verified for your specific system.
Is 232250-7 still available?
232250-7 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 232250-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026