PartsTable
Technical Data Sheet
PartsTable / O-RING / 2314-0067
2314-0067 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, center_hole_diameter: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-595-6325, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2314-0067
NSN: 5331-00-595-6325
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
center_hole_diameter0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.070 INCHES NOMINAL IN
NSN5331-00-595-6325
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2314-0067 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
OUTSIDE DIAMETER: 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE331 MAXIMUM
OUTSIDE DIAMETER0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER0.109 INCHES MINIMUM AND 0.119 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
AS568-006Interchangeable
interchangeable cross-reference
interchangeable
5331PL1335081Interchangeable
interchangeable cross-reference
interchangeable
ABS3209Interchangeable
interchangeable cross-reference
interchangeable
2-006S383-7Interchangeable
interchangeable cross-reference
interchangeable
AS568B-006Interchangeable
interchangeable cross-reference
interchangeable
6046Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2314-0067?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2314-0067?
2314-0067 is a O-RING.
What parts can replace 2314-0067?
There are 30 known substitutes for 2314-0067: AS568-006, 5331PL1335081, ABS3209 and 27 more. Substitute compatibility should be verified for your specific system.
Is 2314-0067 still available?
2314-0067 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2314-0067

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026