PartsTable
Technical Data Sheet
PartsTable / O-RING / 230175N
230175N ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, cross-sectional_height: 0.062 INCHES NOMINAL IN, end_item_identification: MRAP - COMMON NSN - USED ON BUFFALO AND 9 OTHER WEAPON SYSTEMS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-311-9188, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
230175N
NSN: 5331-00-311-9188
FSC: 5331 — O-RING
CAGE: 06853 — BENDIX COMMERCIAL VEHICLE SYSTEMS LLC DBA BENDIX COMMERCIAL VEHICLE SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
cross-sectional_height0.062 INCHES NOMINAL IN
end_item_identificationMRAP - COMMON NSN - USED ON BUFFALO AND 9 OTHER WEAPON SYSTEMS
NSN5331-00-311-9188
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 230175N MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONMRAP - COMMON NSN - USED ON BUFFALO AND 9 OTHER WEAPON SYSTEMS
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
503-4-10363-000Interchangeable
interchangeable cross-reference
interchangeable
230175Interchangeable
interchangeable cross-reference
interchangeable
4108602Interchangeable
interchangeable cross-reference
interchangeable
69473Interchangeable
interchangeable cross-reference
interchangeable
500 035 00Interchangeable
interchangeable cross-reference
interchangeable
68136Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 230175N?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 230175N?
230175N is a O-RING.
What parts can replace 230175N?
There are 10 known substitutes for 230175N: 503-4-10363-000, 230175, 4108602 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 230175N?
230175N is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-311-9188. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 230175N

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026