PartsTable
Technical Data Sheet
PartsTable / O-RING / 69473
69473 ✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GENERATOR,RINGING,HAND is a Clementoni industrial component. Key specifications include material: PLASTIC POLYPROPYLENE, hole_diameter: 8.4 MILLIMETERS NOMINAL8.4 MILLIMETERS NOMINAL MM, overall_width: 36.000 INCHES NOMINAL IN, overall_height: 1.5 MILLIMETERS MINIMUM AND 1.5 MILLIMETERS MINIMUM AND 3.0 MILLIMETERS MAXIMUM3.0 MILLIMETERS MAXIMUM MM, overall_length: 36.000 INCHES NOMINAL IN, hardness_rating: 43.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM50.0 ROCKWELL C MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-311-9188, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
69473
NSN: 5331-00-311-9188
FSC: 5331 — O-RING
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
materialPLASTIC POLYPROPYLENE
hole_diameter8.4 MILLIMETERS NOMINAL8.4 MILLIMETERS NOMINAL MM
overall_width36.000 INCHES NOMINAL IN
overall_height1.5 MILLIMETERS MINIMUM AND 1.5 MILLIMETERS MINIMUM AND 3.0 MILLIMETERS MAXIMUM3.0 MILLIMETERS MAXIMUM MM
overall_length36.000 INCHES NOMINAL IN
hardness_rating43.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM50.0 ROCKWELL C MAXIMUM
outside_diameter15.0 MILLIMETERS NOMINAL15.0 MILLIMETERS NOMINAL MM
special_featuresBLUE; DISPOSABLE; FLUID REPELLENT; SINGLE THICKNESS; CASE OF 150
surface_treatmentPHOSPHATE OVERALL
material_thickness0.74 MILLIMETERS MINIMUM AND 0.74 MILLIMETERS MINIMUM AND 0.86 MILLIMETERS MAXIMUM0.86 MILLIMETERS MAXIMUM MM
part_name_assigned_by_controlling_agencyWRAPPER STERILZ PLAS POLYPROP 36X36"BLUE DISP FLUID REPELL150S
NSN5331-00-311-9188
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 69473 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONMRAP - COMMON NSN - USED ON BUFFALO AND 9 OTHER WEAPON SYSTEMS
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
503-4-10363-000Interchangeable
interchangeable cross-reference
interchangeable
230175Interchangeable
interchangeable cross-reference
interchangeable
4108602Interchangeable
interchangeable cross-reference
interchangeable
69473Interchangeable
interchangeable cross-reference
interchangeable
500 035 00Interchangeable
interchangeable cross-reference
interchangeable
68136Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 69473?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 69473?
69473 is a GENERATOR,RINGING,HAND manufactured by Clementoni.
What parts can replace 69473?
There are 10 known substitutes for 69473: 503-4-10363-000, 230175, 4108602 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 69473?
69473 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-311-9188. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 69473

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026