PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 23005-3

23005-3 — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

PARTS KIT,AFTERBURNER,FUEL CONTR. Key specifications include end_item_identification: JFC54 FUEL CONTROL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-594-9501, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
23005-3
NSN: 5315-00-594-9501
FSC: 5315
CAGE: U0112 — HANCOX LTD (GBR)
SPECIFICATIONS
end_item_identificationJFC54 FUEL CONTROL
NSN5315-00-594-9501
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 23005-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: CHAMFERED
•
MATERIAL: STEEL OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER ANGLE: 29.5 DEGREES MINIMUM AND 30.5 DEGREES MAXIMUM
•
PIN OVERALL LENGTH: 6.302 INCHES MINIMUM AND 6.322 INCHES MAXIMUM IN
•
HARDNESS RATING: 50.0 ROCKWELL C MAXIMUM OVERALL
•
FIRST END TAPER LENGTH: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
PIN OVERALL DIAMETER: 0.4360 INCHES MINIMUM AND 0.4365 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END STYLECHAMFERED
MATERIALSTEEL OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER ANGLE29.5 DEGREES MINIMUM AND 30.5 DEGREES MAXIMUM
PIN OVERALL LENGTH6.302 INCHES MINIMUM AND 6.322 INCHES MAXIMUM IN
HARDNESS RATING50.0 ROCKWELL C MAXIMUM OVERALL
FIRST END TAPER LENGTH0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
PIN OVERALL DIAMETER0.4360 INCHES MINIMUM AND 0.4365 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
23005-2Interchangeable
interchangeable cross-reference
interchangeable
503-4-10326-000Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 23005-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 23005-3?
23005-3 is a PARTS KIT,AFTERBURNER,FUEL CONTR.
What parts can replace 23005-3?
There are 2 known substitutes for 23005-3: 23005-2, 503-4-10326-000. Substitute compatibility should be verified for your specific system.
What is the NSN for 23005-3?
23005-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-594-9501. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 23005-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026