PartsTable
Technical Data Sheet
Download PDF

503-4-10326-000 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

503-4-10326-000: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, hardness_rating: 50.0 ROCKWELL C MAXIMUM OVERALL, pin_overall_length: 6.302 INCHES MINIMUM AND 6.322 INCHES MAXIMUM IN, pin_overall_diameter: 0.4360 INCHES MINIMUM AND 0.4365 INCHES MAXIMUM IN, first_end_taper_angle: 29.5 DEGREES MINIMUM AND 30.5 DEGREES MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-594-9501, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
503-4-10326-000
NSN: 5315-00-594-9501
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: K2523 — EATON LIMITED (GBR)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
hardness_rating50.0 ROCKWELL C MAXIMUM OVERALL
pin_overall_length6.302 INCHES MINIMUM AND 6.322 INCHES MAXIMUM IN
pin_overall_diameter0.4360 INCHES MINIMUM AND 0.4365 INCHES MAXIMUM IN
first_end_taper_angle29.5 DEGREES MINIMUM AND 30.5 DEGREES MAXIMUM
first_end_taper_length0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-594-9501
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 503-4-10326-000 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 50.0 ROCKWELL C MAXIMUM OVERALL
•
FIRST END TAPER ANGLE: 29.5 DEGREES MINIMUM AND 30.5 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 0.4360 INCHES MINIMUM AND 0.4365 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 6.302 INCHES MINIMUM AND 6.322 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
HARDNESS RATING50.0 ROCKWELL C MAXIMUM OVERALL
FIRST END TAPER ANGLE29.5 DEGREES MINIMUM AND 30.5 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.4360 INCHES MINIMUM AND 0.4365 INCHES MAXIMUM IN
PIN OVERALL LENGTH6.302 INCHES MINIMUM AND 6.322 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
230053Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 503-4-10326-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 503-4-10326-000?
503-4-10326-000 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 503-4-10326-000?
There is 1 known substitute for 503-4-10326-000: 230053. Substitute compatibility should be verified for your specific system.
What is the NSN for 503-4-10326-000?
503-4-10326-000 is cataloged in the U.S. Government catalog under NSN 5315-00-594-9501. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 503-4-10326-000