PartsTable
Technical Data Sheet
Download PDF

218156507 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

218156507: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, thickness: 0.146 INCHES MINIMUM AND 0.174 INCHES MAXIMUM IN, hole_diameter: 1.305 INCHES MINIMUM AND 1.342 INCHES MAXIMUM IN, hardness_rating: 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM, overall_diameter: 2.243 INCHES MINIMUM AND 2.280 INCHES MAXIMUM IN, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-733-5262, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
218156507
NSN: 5310-01-733-5262
FSC: 5310 — Nuts and Washers
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
thickness0.146 INCHES MINIMUM AND 0.174 INCHES MAXIMUM IN
hole_diameter1.305 INCHES MINIMUM AND 1.342 INCHES MAXIMUM IN
hardness_rating24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
overall_diameter2.243 INCHES MINIMUM AND 2.280 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
specification/standard_data0U583-SAE J2655 INTERNATIONAL STD/SPEC
material_document_and_classificationQQ-N-286, GRADE 500, ANNEALED AND AGE HARDENED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyFASTENER PART STANDARD - WASHERS AND LOCKWASHERS (INCH DIMENSIONED)
NSN5310-01-733-5262
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 218156507 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 2.243 INCHES MINIMUM AND 2.280 INCHES MAXIMUM IN
•
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-286, GRADE 500, ANNEALED AND AGE HARDENED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SPECIFICATION/STANDARD DATA: 0U583-SAE J2655 INTERNATIONAL STD/SPEC
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: NICKEL ALLOY OVERALL
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER2.243 INCHES MINIMUM AND 2.280 INCHES MAXIMUM IN
HARDNESS RATING24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-286, GRADE 500, ANNEALED AND AGE HARDENED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SPECIFICATION/STANDARD DATA0U583-SAE J2655 INTERNATIONAL STD/SPEC
PERIPHERAL SHAPE STYLEROUND
PART NAME ASSIGNED BY CONTROLLING AGENCYFASTENER PART STANDARD - WASHERS AND LOCKWASHERS (INCH DIMENSIONED)
MATERIALNICKEL ALLOY OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER1.305 INCHES MINIMUM AND 1.342 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 4
J2655FBN1250N5Reference document
Same NSN cross-reference
Reference document — Secondary reference
SAE J2655Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LOA006320-148Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
R4333008-148Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 218156507?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 218156507?
218156507 is a WASHER,FLAT.
What parts can replace 218156507?
There are 4 known substitutes for 218156507: J2655FBN1250N5, SAE J2655, LOA006320-148 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 218156507?
218156507 is cataloged in the U.S. Government catalog under NSN 5310-01-733-5262. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 218156507

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.