SAE J2655: WASHER,FLAT.
The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OVERALL, thickness: 0.090 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN, hole_diameter: 0.931 INCHES MINIMUM AND 0.968 INCHES MAXIMUM IN, hardness_rating: 60.0 ROCKWELL B MINIMUM, overall_diameter: 1.462 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN, peripheral_shape_style: ROUND. This part is cataloged in the U.S.
Government catalog under NSN 5310-01-689-7000, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | NICKEL ALLOY 400 OVERALL |
| thickness | 0.090 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN |
| hole_diameter | 0.931 INCHES MINIMUM AND 0.968 INCHES MAXIMUM IN |
| hardness_rating | 60.0 ROCKWELL B MINIMUM |
| overall_diameter | 1.462 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN |
| peripheral_shape_style | ROUND |
| center_hole_shape_style | ROUND |
| cross-sectional_shape_style | RECTANGULAR |
| specification/standard_data | 0U583-SAE J2655 INTERNATIONAL STD/SPEC |
| material_document_and_classification | QQ-N-286, GRADE 500, ANNEALED AND AGE HARDENED FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| part_name_assigned_by_controlling_agency | FASTENER PART STANDARD - WASHERS AND LOCKWASHERS (INCH DIMENSIONED) |
| NSN | 5310-01-689-7000 |
| OVERALL DIAMETER | 0.727 INCHES MINIMUM AND 0.749 INCHES MAXIMUM IN |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| PERIPHERAL SHAPE STYLE | ROUND |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER,FLAT,ROUND |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| CENTER HOLE SHAPE STYLE | ROUND |
| HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN |
| THICKNESS | 0.056 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN |