PartsTable
Technical Data Sheet
Download PDF

21518-1 — SEAL,BATTERY ENCLOSURE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

21518-1: SEAL,BATTERY ENCLOSURE.

The SEAL,BATTERY ENCLOSURE is a the manufacturer cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include special_features: USED TI FIND WAYS TO MAKE METEROLOGICAL SYSTEM MORE USER FRIENDLY, end_item_identification: RANGE OPERATIONS CONTROL CENTER METEOROLOGICAL SYSTEM. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-273-4705, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
21518-1
NSN: 5305-00-273-4705
NIINs: 002734705, 006590520, 014229630
FSC: 5305 — Screws
CAGE: 44674 — THE OILGEAR COMPANY DBA JIFFY LUBE 213 DIV OILGEAR (USA)
SPECIFICATIONS
special_featuresUSED TI FIND WAYS TO MAKE METEROLOGICAL SYSTEM MORE USER FRIENDLY
end_item_identificationRANGE OPERATIONS CONTROL CENTER METEOROLOGICAL SYSTEM
NSN5305-00-273-4705
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 21518-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.188 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.500 INCHES MINIMUM IN
•
HOLE CONFIGURATION STYLE: ROUND
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.188 INCHES NOMINAL IN
HEAD HEIGHT0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD LENGTH0.500 INCHES MINIMUM IN
HOLE CONFIGURATION STYLEROUND
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 2
5244990Reference document
Same NSN cross-reference
Reference document — Secondary reference
25704-281550-10-0Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 21518-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 21518-1?
21518-1 is a SEAL,BATTERY ENCLOSURE.
What parts can replace 21518-1?
There are 2 known substitutes for 21518-1: 5244990, 25704-281550-10-0. Substitute compatibility should be verified for your specific system.
What is the NSN for 21518-1?
21518-1 is cataloged in the U.S. Government catalog under NSN 5305-00-273-4705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 21518-1