PartsTable
Technical Data Sheet
Download PDF

5244990 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

5244990: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: FLAT CHAMFER, head_height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-273-4705, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5244990
NSN: 5305-00-273-4705
FSC: 5305 — Screws
CAGE: D5589 — FEINMECHANISCHE WERKE MAINZ GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleFLAT CHAMFER
head_height0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.375 INCHES NOMINAL IN
hole_diameter0.062 INCHES NOMINAL IN
hole_quantity2
thread_length0.500 INCHES MINIMUM IN
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_across_flats0.188 INCHES NOMINAL IN
NSN5305-00-273-4705
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5244990 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.188 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD LENGTH: 0.500 INCHES MINIMUM IN
•
HOLE CONFIGURATION STYLE: ROUND
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.188 INCHES NOMINAL IN
HEAD HEIGHT0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD LENGTH0.500 INCHES MINIMUM IN
HOLE CONFIGURATION STYLEROUND
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
25704-281550-10-0Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5244990?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5244990?
5244990 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 5244990?
There is 1 known substitute for 5244990: 25704-281550-10-0. Substitute compatibility should be verified for your specific system.
What is the NSN for 5244990?
5244990 is cataloged in the U.S. Government catalog under NSN 5305-00-273-4705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5244990