PartsTable
Technical Data Sheet
214324 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SPACER,RING is a the manufacturer industrial component. Key specifications include material: STEEL, inside_diameter: 0.197 INCHES NOMINAL IN, outside_diameter: 0.308 INCHES MINIMUM AND 0.318 INCHES MAXIMUM IN, special_features: LENGTH: 0.375; MIN. TENSILE STRENGTH: 85,000 PSI; T-BOLT SIZE: .1900, overall_thickness: 0.058 INCHES NOMINAL IN, surface_treatment: CADMIUM.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-640-9613, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
214324
NSN: 5331-00-640-9613
FSC: 5331 — O-RING
CAGE: 06840 — BENDIX CORP THE (USA)
SPECIFICATIONS
materialSTEEL
inside_diameter0.197 INCHES NOMINAL IN
outside_diameter0.308 INCHES MINIMUM AND 0.318 INCHES MAXIMUM IN
special_featuresLENGTH: 0.375; MIN. TENSILE STRENGTH: 85,000 PSI; T-BOLT SIZE: .1900
overall_thickness0.058 INCHES NOMINAL IN
surface_treatmentCADMIUM
end_item_identificationNSN: 1520-01-082-0686; HELICOPTER, ELECTRON
material_document_and_classificationMIL-T-6736, 4130 ALLOY MIL SPEC SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classificationQQ-P-416, TYPE 2, CLASS 2, COLOR CODE: NONE FED SPEC SINGLE TREATMENT RESPONSE
NSN5331-00-640-9613
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 214324 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CENTER HOLE DIAMETER: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
100-152Interchangeable
interchangeable cross-reference
interchangeable
347360R1Interchangeable
interchangeable cross-reference
interchangeable
1820-7Interchangeable
interchangeable cross-reference
interchangeable
AN6227B7Interchangeable
interchangeable cross-reference
interchangeable
13856PC7Interchangeable
interchangeable cross-reference
interchangeable
MV-3264-28-MCInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 214324?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 214324?
214324 is a SPACER,RING.
What parts can replace 214324?
There are 29 known substitutes for 214324: 100-152, 347360R1, 1820-7 and 26 more. Substitute compatibility should be verified for your specific system.
Is 214324 still available?
214324 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 214324