PartsTable
Technical Data Sheet
1717-12 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The INVERTED NUT,TUBE COUPLING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X, thread_size: 13/16-16, overall_length: 0.650 INCHES NOMINAL IN, style_designator: INVERTED NUT, TUBE, COMPRESSION, thread_direction: RIGHT-HAND, seat_angle_in_deg: 45.0. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-640-9613, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1717-12
NSN: 5331-00-640-9613
FSC: 5331 — O-RING
CAGE: 43491 — GENERAL SIGNAL CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X
thread_size13/16-16
overall_length0.650 INCHES NOMINAL IN
style_designatorINVERTED NUT, TUBE, COMPRESSION
thread_directionRIGHT-HAND
seat_angle_in_deg45.0
surface_treatmentPASSIVATE
fabrication_methodBAR STOCK, MACHINED
width_across_flats0.868 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
thread_pitch_diameters+0.7687 TO 0.7714 INCHES IN
casehardening_indicatorNOT CASEHARDENED
smallest_inside_diameter0.530 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
NSN5331-00-640-9613
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1717-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CENTER HOLE DIAMETER: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
100-152Interchangeable
interchangeable cross-reference
interchangeable
347360R1Interchangeable
interchangeable cross-reference
interchangeable
1820-7Interchangeable
interchangeable cross-reference
interchangeable
AN6227B7Interchangeable
interchangeable cross-reference
interchangeable
13856PC7Interchangeable
interchangeable cross-reference
interchangeable
MV-3264-28-MCInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1717-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1717-12?
1717-12 is a INVERTED NUT,TUBE COUPLING.
What parts can replace 1717-12?
There are 29 known substitutes for 1717-12: 100-152, 347360R1, 1820-7 and 26 more. Substitute compatibility should be verified for your specific system.
Is 1717-12 still available?
1717-12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1717-12