PartsTable
Technical Data Sheet
Download PDF

212272 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

212272: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_diameter: 0.622 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, overall_width: 0.34370 INCHES MINIMUM AND 0.34375 INCHES MAXIMUM IN, overall_length: 1.370 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN, type/model_designation: TPI-3T-3A-HF A, end_item_identification: 4930-01-706-1485, part_name_assigned_by_controlling_agency: BEARING,ANNULAR BALL. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-719-3947, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
212272
NSN: 3110-01-719-3947
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 47186 — HAMMONDS TECHNICAL SERVICES, INC. (USA)
SPECIFICATIONS
bore_diameter0.622 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
overall_width0.34370 INCHES MINIMUM AND 0.34375 INCHES MAXIMUM IN
overall_length1.370 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
type/model_designationTPI-3T-3A-HF A
end_item_identification4930-01-706-1485
part_name_assigned_by_controlling_agencyBEARING,ANNULAR BALL
NSN3110-01-719-3947
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 212272 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.622 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
TYPE/MODEL DESIGNATION: TPI-3T-3A-HF A
TECHNICAL CHARACTERISTICS
OVERALL LENGTH1.370 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
OVERALL WIDTH0.34370 INCHES MINIMUM AND 0.34375 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBEARING,ANNULAR BALL
END ITEM IDENTIFICATION4930-01-706-1485
BORE DIAMETER0.622 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
TYPE/MODEL DESIGNATIONTPI-3T-3A-HF A
SUBSTITUTES & CROSS-REFERENCES 1
77R10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 212272?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 212272?
212272 is a BEARING,BALL,ANNULAR.
What parts can replace 212272?
There is 1 known substitute for 212272: 77R10. Substitute compatibility should be verified for your specific system.
What is the NSN for 212272?
212272 is cataloged in the U.S. Government catalog under NSN 3110-01-719-3947. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 212272