PartsTable
Technical Data Sheet
Download PDF

77R10 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

77R10: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_diameter: 0.622 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, overall_width: 0.34370 INCHES MINIMUM AND 0.34375 INCHES MAXIMUM IN, overall_length: 1.370 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN, type/model_designation: TPI-3T-3A-HF A, end_item_identification: 4930-01-706-1485, part_name_assigned_by_controlling_agency: BEARING,ANNULAR BALL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-155-8448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
77R10
NSN: 3110-00-155-8448
NIINs: 001558448, 017193947
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
bore_diameter0.622 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
overall_width0.34370 INCHES MINIMUM AND 0.34375 INCHES MAXIMUM IN
overall_length1.370 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
type/model_designationTPI-3T-3A-HF A
end_item_identification4930-01-706-1485
part_name_assigned_by_controlling_agencyBEARING,ANNULAR BALL
NSN3110-00-155-8448
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 77R10 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 1.3750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.3430 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.3750 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 9
R10FFReference document
Same NSN cross-reference
Reference document — Secondary reference
S7KDDSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
68Reference document
Same NSN cross-reference
Reference document — Secondary reference
954726Reference document
Same NSN cross-reference
Reference document — Secondary reference
GK688Reference document
Same NSN cross-reference
Reference document — Secondary reference
3110001558448Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 77R10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 77R10?
77R10 is a BEARING,BALL,ANNULAR.
What parts can replace 77R10?
There are 9 known substitutes for 77R10: R10FF, S7KDD, 68 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 77R10?
77R10 is cataloged in the U.S. Government catalog under NSN 3110-00-155-8448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 77R10