2118 — BLADE,WINDSHIELD WIPER

✓ Government record, cited

Hama · MRO · MRO_GENERAL

PRODUCT OVERVIEW

2118: BLADE,WINDSHIELD WIPER.

The BLADE,WINDSHIELD WIPER is a Hama industrial component. Key specifications include part_name_assigned_by_controlling_agency: EASYLYTE CALCIUM RINSE SOLUTION KIT. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-067-0454, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 2118

NSN: 4720-00-067-0454
NIINs: 000670454, 000739243, 000815441, 001006152, 001661072, 001666249, 002484603, 004597710, 005167780, 005786594, 007263824, 009691908, 009822778, 013312062, 013321443, 013432237, 013610195, 013944211, 015479647
FSC: 4720 — Hose and Flexible Tubing
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)

SPECIFICATIONS

part_name_assigned_by_controlling_agency	EASYLYTE CALCIUM RINSE SOLUTION KIT
NSN	4720-00-067-0454

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF

•

MINIMUM INSIDE BENDING RADIUS: 4.625 INCHES IN

•

VACUUM IN TORR: 50.8

•

LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED FABRIC AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC

•

CROSS-SECTIONAL SHAPE STYLE: ROUND

•

OUTSIDE DIAMETER: 0.766 INCHES NOMINAL IN

•

OPERATING PRESSURE: 2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS

•

SPECIFICATION/STANDARD DATA: 81343-SAE J517,100R5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

TECHNICAL CHARACTERISTICS

TEMP RATING	-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS	4.625 INCHES IN
VACUUM IN TORR	50.8
LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED FABRIC AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC
CROSS-SECTIONAL SHAPE STYLE	ROUND
OUTSIDE DIAMETER	0.766 INCHES NOMINAL IN
OPERATING PRESSURE	2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIFICATION/STANDARD DATA	81343-SAE J517,100R5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NONDEFINITIVE SPEC/STD DATA	8 SIZE
INSIDE DIAMETER	0.406 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 10

2BE910Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

8QWReference document

Same NSN cross-reference

Reference document — Secondary reference

100R5-8Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

81503Reference document

Same NSN cross-reference

Reference document — Secondary reference

1503-8Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

547-649-013Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 2118?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2118?

2118 is a BLADE,WINDSHIELD WIPER manufactured by Hama. It is classified as a MRO (MRO_GENERAL).

What parts can replace 2118?

There are 10 known substitutes for 2118: 2BE910, 8QW, 100R5-8 and 7 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2118?

2118 is cataloged in the U.S. Government catalog under NSN 4720-00-067-0454. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2118 — BLADE,WINDSHIELD WIPER

Request a Quote — 2118