PartsTable
Technical Data Sheet
PartsTable / MRO / 201K
201K ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, RADIAL TERMINALS, body_width: 0.208 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN, bore_shape: STRAIGHT, body_height: 0.375 INCHES NOMINAL IN, body_length: 0.156 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-2359, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 201K
NSN: 3110-00-100-2359
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
body_width0.208 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
bore_shapeSTRAIGHT
body_height0.375 INCHES NOMINAL IN
body_length0.156 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
shaft_length0.030 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
body_diameter0.250 INCHES MAXIMUM IN
bore_diameter12.00 MILLIMETERS NOMINAL MM
overall_width0.208 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
NSN3110-00-100-2359
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 201K · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 12.00 MILLIMETERS NOMINAL MM
•
MATERIAL: RUBBER SYNTHETIC SEAL
•
LOAD DIRECTION: RADIAL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
SEAL QUANTITY: 1
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER12.00 MILLIMETERS NOMINAL MM
MATERIALRUBBER SYNTHETIC SEAL
LOAD DIRECTIONRADIAL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL RETAINER
MATERIALSTEEL INNER RING
OVERALL WIDTH10.0 MILLIMETERS NOMINAL MM
SEAL QUANTITY1
SURFACE FINISHGROUND
MATERIALSTEEL BALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
201PInterchangeable
interchangeable cross-reference
interchangeable
060-8Interchangeable
interchangeable cross-reference
interchangeable
B78565Interchangeable
interchangeable cross-reference
interchangeable
20Interchangeable
2 x Intel Xeon E5-2650 v4 2.2GHz,30M Cache,9.60GT/s QPI,Turbo,HT,12C/24T (105W) Max Mem 2400MHz
interchangeable
037885Interchangeable
interchangeable cross-reference
interchangeable
101-1KInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 201K?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 201K?
201K is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 201K?
There are 17 known substitutes for 201K: 201P, 060-8, B78565 and 14 more. Substitute compatibility should be verified for your specific system.
Is 201K still available?
201K is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 201K

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026