PartsTable
Technical Data Sheet
PartsTable / MRO / 060-8
060-8 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include color: CLEAR, shape: CYLINDRICAL, material: GLASS LOCATION NOT OTHERWISE SPECIFIED, back_gage: 36.000 INCHES IN, bed_width: 18.000 INCHES NOMINAL IN, bore_shape: STRAIGHT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-144-8992, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 060-8
NSN: 3110-00-144-8992
FSC: 3110
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
colorCLEAR
shapeCYLINDRICAL
materialGLASS LOCATION NOT OTHERWISE SPECIFIED
back_gage36.000 INCHES IN
bed_width18.000 INCHES NOMINAL IN
bore_shapeSTRAIGHT
front_gage55.000 INCHES IN
body_length6.500 INCHES NOMINAL IN
closure_typeSNAP-ON CAP
bore_diameter12.00 MILLIMETERS NOMINAL MM
overall_width10.0 MILLIMETERS NOMINAL MM
terminal_typeTAB, SOLDER LUG
NSN3110-00-144-8992
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 060-8 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL SHIELD
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE DIAMETER: 12.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
MATERIALSTEEL SHIELD
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER12.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
SHIELD QUANTITY1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
SEC857GInterchangeable
interchangeable cross-reference
interchangeable
B6259Interchangeable
interchangeable cross-reference
interchangeable
37161Interchangeable
interchangeable cross-reference
interchangeable
6201RSInterchangeable
interchangeable cross-reference
interchangeable
302-1016P8Interchangeable
interchangeable cross-reference
interchangeable
SKA1621Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 060-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 060-8?
060-8 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 060-8?
There are 31 known substitutes for 060-8: SEC857G, B6259, 37161 and 28 more. Substitute compatibility should be verified for your specific system.
Is 060-8 still available?
060-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 060-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026