The Shaft,propulsion,ship, cataloged under National Stock Number 2010-00-573-8052, is classified within Federal Supply Class 2010 (Ship and Boat Propulsion Components) of the Ship and Marine Equipment group. The manufacturer of record is Huntington Ingalls Incorporated Div Ingalls Shipbuilding. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 2010-00-573-8052 |
| Primary Part Number | 2010DA0-101002 |
| Item Name | Shaft,propulsion,ship |
| FSC / FSG | 2010 / 20 — Ship and Boat Propulsion Components |
| Manufacturer | Huntington Ingalls Incorporated Div Ingalls Shipbuilding |
| Status | ACTIVE |
| Forward End Coupling Design | INTEGRAL |
| Coupling Length | 0.354 FEET NOMINAL FT |
| Surface Finish | GROUND OR ROUGH MACHINED OR SMOOTH MACHINED |
| After End Design | STRAIGHT |
| After End Coupling Design | INTEGRAL |
| Forward End Coupling Thickness | 4.250 INCHES NOMINAL IN |
| Material Document and Classification | MIL-S-23284, CLASS 3 MIL SPEC SINGLE MATERIAL RESPONSE |
| Diameter | 20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM IN |
| Outside Diameter | 20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM IN |
| Forward End Coupling Length | 0.442 FEET NOMINAL FT |
| Forward End Design | STRAIGHT |
| Coupling Outside Diameter | 35.500 INCHES NOMINAL IN |
| Covering Location | SURFACES BETWEEN BEARING SLEEVES AND FLANGE FACES,BORE SURFACES |
| Forward End Diameter | 20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM IN |
| Forward End Coupling Outside Diameter | 35.500 INCHES NOMINAL IN |
| Inside Diameter | 13.380 INCHES MINIMUM AND 13.560 INCHES MAXIMUM IN |
| Protective Covering Type | COMPOSITION RUST PREVENTIVE |
| Unit Type | LINE SHAFT SECTION |
| Intermediate Bearing Sleeve Outside Diameter | 20.621 INCHES MINIMUM AND 20.625 INCHES MAXIMUM IN |
| Coupling Thickness | 4.250 INCHES NOMINAL IN |
| Material | STEEL |
| Construction | HOLLOW |
| Usage Location | PORT/STARBOARD |
| Intermediate Bearing Sleeve Length | 3.833 FEET NOMINAL FT |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| LD203001PC080002 | Huntington Ingalls Incorporated Div Ingalls Shipbuilding (USA) |
| 2010DA0-101002 PRIMARY | Huntington Ingalls Incorporated Div Ingalls Shipbuilding (USA) |
NSN 2010-00-573-8052 is a Shaft,propulsion,ship, manufactured by Huntington Ingalls Incorporated Div Ingalls Shipbuilding, classified under FSC 2010, Ship and Boat Propulsion Components. Status: active.
NSN 2010-00-573-8052 has 2 manufacturer part numbers on file: LD203001PC080002 (Huntington Ingalls Incorporated Div Ingalls Shipbuilding), 2010DA0-101002 (Huntington Ingalls Incorporated Div Ingalls Shipbuilding).
Key specifications for 2010DA0-101002: Forward End Coupling Design: INTEGRAL; Coupling Length: 0.354 FEET NOMINAL FT; Surface Finish: GROUND OR ROUGH MACHINED OR SMOOTH MACHINED; After End Design: STRAIGHT. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.