20040 — RESISTOR,FIXED,WIRE WOUND,NONIND

✓ Government record, cited

Legrand · MRO · MRO_GENERAL

PRODUCT OVERVIEW

20040: RESISTOR,FIXED,WIRE WOUND,NONIND.

- SATA zu SATA interface - Plug & Play and Hot Swap - 2x Power connector (4Pin and 15Pin) - Compact construction, 188 mm deep - All aluminium material A Better Place for Internals This mobile rack is made for the employment of an additional SATA HDD in the computer. The SATA connector at the back leads directly to the SATA controller of the motherboard. Cooling comes from the frontal fan.

Optically appealing is the “Blue Eye”, the LED at the front of the drawer. Case made of valuable aluminium. This part is cataloged in the U.S.

Government catalog under NSN 5133-00-228-1327, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS

MRO→ MRO_GENERAL→ 20040

NSN: 5133-00-228-1327
NIINs: 002281327, 002362377, 002777133, 003666423, 004374767, 005080563, 005264505, 007581494, 007636402, 007745200, 008654676, 008907627, 011132856, 011373019, 011469832, 012564632, 012995143, 013655704, 013756184, 014001287, 014405412, 014824500, 016050824
FSC: 5133 — Drill Bits, Counterbores, and Countersinks: Hand and Machine
CAGE: 16568 — PRECISION TWIST DRILL CO (USA)

SPECIFICATIONS

guide	NOT INCLUDED
diameter	0.125 INCHES NOMINAL IN
material	ALUMINA
tip_type	INTEGRAL
body_style	RECTANGULAR
body_width	0.250 INCHES NOMINAL IN
cut_length	0.375 INCHES NOMINAL IN
flute_type	INTEGRAL
point_type	CONVENTIONAL
shank_type	STRAIGHT
body_height	0.250 INCHES NOMINAL IN
body_length	0.250 INCHES MAXIMUM IN
NSN	5133-00-228-1327

COMPONENT DIAGRAM

KEY FEATURES

•

CUTTING END STYLE: GENERAL PURPOSE

•

TAPER SHANK SIZE DESIGNATOR: 2 MORSE

•

FLUTE LENGTH: 4.875 INCHES NOMINAL IN

•

NOMINAL CUTTING DIAMETER: 0.6250 INCHES IN

•

CUTTING ROTATION DIRECTION: RIGHT-HAND

•

SPECIFICATION/STANDARD DATA: 05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

•

SHANK STYLE: STANDARD TAPER W/TANG

TECHNICAL CHARACTERISTICS

CUTTING END STYLE	GENERAL PURPOSE
TAPER SHANK SIZE DESIGNATOR	2 MORSE
FLUTE LENGTH	4.875 INCHES NOMINAL IN
OVERALL LENGTH	8.750 INCHES NOMINAL IN
NOMINAL CUTTING DIAMETER	0.6250 INCHES IN
CUTTING ROTATION DIRECTION	RIGHT-HAND
SPECIFICATION/STANDARD DATA	05047-ASME B94.11M PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SHANK STYLE	STANDARD TAPER W/TANG
FLUTE QUANTITY	2
SPECIAL FEATURES	TAPER SHANK LG; FRACTIONAL SIZE 5/8

SUBSTITUTES & CROSS-REFERENCES 10

C12204Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

53140Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

42-10174Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

41140Reference document

Same NSN cross-reference

Reference document — Secondary reference

10040Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

B94.11MReference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

Manufacturer release date (catalog record)2021-01-08

No demilitarization required

Ready to buy 20040?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 20040?

20040 is a RESISTOR,FIXED,WIRE WOUND,NONIND manufactured by Legrand. It is classified as a MRO (MRO_GENERAL).

What parts can replace 20040?

There are 10 known substitutes for 20040: C12204, 53140, 42-10174 and 7 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 20040?

20040 is cataloged in the U.S. Government catalog under NSN 5133-00-228-1327. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

20040 — RESISTOR,FIXED,WIRE WOUND,NONIND

Request a Quote — 20040