PartsTable
Technical Data Sheet
Download PDF

I1213-2 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

I1213-2: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: COPPER ALLOY OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 1.7425 INCHES MINIMUM AND 1.7575 INCHES MAXIMUM IN, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 1.0010 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM IN, body_outside_diameter: 1.2510 INCHES MINIMUM AND 1.2520 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-425-8616, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
I1213-2
NSN: 3120-00-425-8616
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 8E499 — KOEHRING CRANES AND EXCAVATORS INC SUB OF NORTHWEST ENGINEERING CO (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
corner_shapeSQUARE ALL CORNERS
overall_length1.7425 INCHES MINIMUM AND 1.7575 INCHES MAXIMUM IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter1.0010 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM IN
body_outside_diameter1.2510 INCHES MINIMUM AND 1.2520 INCHES MAXIMUM IN
NSN3120-00-425-8616
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: I1213-2 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 1.2510 INCHES MINIMUM AND 1.2520 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
BODY INSIDE DIAMETER: 1.0010 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER1.2510 INCHES MINIMUM AND 1.2520 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
OVERALL LENGTH1.7425 INCHES MINIMUM AND 1.7575 INCHES MAXIMUM IN
BODY INSIDE DIAMETER1.0010 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
AA1213-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SL1004-28Reference document
Same NSN cross-reference
Reference document — Secondary reference
18LA812-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LA812-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
A1213-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy I1213-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is I1213-2?
I1213-2 is a RESISTOR,VARIABLE,WIRE WOUND,PRE.
What parts can replace I1213-2?
There are 5 known substitutes for I1213-2: AA1213-2, SL1004-28, 18LA812-5 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for I1213-2?
I1213-2 is cataloged in the U.S. Government catalog under NSN 3120-00-425-8616. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — I1213-2