PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2-300-025-02
2-300-025-02 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 12.00 MILLIMETERS NOMINAL MM, overall_width: 10.00 MILLIMETERS NOMINAL MM, alignment_type: SELF-ALIGNING, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-933-8363, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-300-025-02
NSN: 3110-00-933-8363
FSC: 3110
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter12.00 MILLIMETERS NOMINAL MM
overall_width10.00 MILLIMETERS NOMINAL MM
alignment_typeSELF-ALIGNING
load_directionANGULAR
surface_finishGROUND
special_featuresHEAT STABILIZED FOR OPERATION AT M 65 TO P 400 DEG F DEGF
style_designatorNON-SEPARABLE
features_providedALIGNING RING
internal_clearance0.0043 INCHES NOMINAL AXIAL AND 0.0003 INCHES MINIMUM RADIAL AND 0.0015 INCHES MAXIMUM RADIAL IN
self-alignment_locationINTERNAL
NSN3110-00-933-8363
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2-300-025-02 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
INTERNAL CLEARANCE: 0.0043 INCHES NOMINAL AXIAL AND 0.0003 INCHES MINIMUM RADIAL AND 0.0015 INCHES MAXIMUM RADIAL IN
•
LOAD DIRECTION: ANGULAR
•
RETAINER FABRICATION METHOD: MACHINED
•
STYLE DESIGNATOR: NON-SEPARABLE
•
MATERIAL: STEEL RETAINER
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
OVERALL WIDTH10.00 MILLIMETERS NOMINAL MM
INTERNAL CLEARANCE0.0043 INCHES NOMINAL AXIAL AND 0.0003 INCHES MINIMUM RADIAL AND 0.0015 INCHES MAXIMUM RADIAL IN
LOAD DIRECTIONANGULAR
RETAINER FABRICATION METHODMACHINED
STYLE DESIGNATORNON-SEPARABLE
MATERIALSTEEL RETAINER
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6441 ASSN STD SINGLE MATERIAL RESPONSE BALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
21107Interchangeable
interchangeable cross-reference
interchangeable
103S13Interchangeable
interchangeable cross-reference
interchangeable
08125Interchangeable
interchangeable cross-reference
interchangeable
B1AInterchangeable
interchangeable cross-reference
interchangeable
RP064-69NE51Interchangeable
interchangeable cross-reference
interchangeable
21A00-0011Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-300-025-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-300-025-02?
2-300-025-02 is a BEARING,BALL,ANNULAR.
What parts can replace 2-300-025-02?
There are 22 known substitutes for 2-300-025-02: 21107, 103S13, 08125 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-300-025-02?
2-300-025-02 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-933-8363. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-300-025-02

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026