PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 08125
08125 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3702, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
08125
NSN: 3110-00-100-3702
FSC: 3110
CAGE: Z0992 — AUSTRALIAN TIMKEN PTY LTD (AUS)
SPECIFICATIONS
special_featuresCARBON STEEL WIRE,NICKEL CHROME FINISH;10 RINGS 0.072 IN.DIA SPACED 0.240 IN.;ACCOMMODATE 6 IN.DIA FAN W/6.380 IN.MTG; IN
NSN3110-00-100-3702
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 08125 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0400 INCHES NOMINAL IN
•
CONE WIDTH: 0.5937 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OVERALL OUTSIDE DIAMETER: 2.3125 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0400 INCHES NOMINAL IN
CONE WIDTH0.5937 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OVERALL OUTSIDE DIAMETER2.3125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
BORE DIAMETER1.2500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
B1AInterchangeable
interchangeable cross-reference
interchangeable
RP064-69NE51Interchangeable
interchangeable cross-reference
interchangeable
21A00-0011Interchangeable
interchangeable cross-reference
interchangeable
170-502Interchangeable
interchangeable cross-reference
interchangeable
025-00116Interchangeable
interchangeable cross-reference
interchangeable
165064-0000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 08125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 08125?
08125 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 08125?
There are 21 known substitutes for 08125: B1A, RP064-69NE51, 21A00-0011 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 08125?
08125 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3702. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 08125

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026