PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-134 V747-75
2-134 V747-75 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include color: BROWN, material: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM, temp_rating: -5.0 CELSIUS AND 205.0 CELSIUS DEGC, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, special_features: O-RING SHAPE;OPERATED BY FLUID HIGH TEMPERATURE, center_hole_diameter: 1.847 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5122, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-134 V747-75
NSN: 5331-00-167-5122
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
colorBROWN
materialRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM
temp_rating-5.0 CELSIUS AND 205.0 CELSIUS DEGC
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
special_featuresO-RING SHAPE;OPERATED BY FLUID HIGH TEMPERATURE
center_hole_diameter1.847 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identification2840-99-645-9394;2840-99-645-9395;2840-99-766-0507;2840-99-766-0508 MODEL RB199MK101/103/104
material_document_and_classificationAMS7280 ASSN STD SINGLE MATERIAL RESPONSE OR AMSTD2000/SAE J200 ASSN STD SINGLE MATERIAL RESPONSE
reference_number_differentiating_characteristicsAS DIFF BY SPEC K2617 HTE7300 PERFORMANCE RQMT TORNADO ACFT ENGINE MODEL RB199
NSN5331-00-167-5122
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-134 V747-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.047 INCHES MINIMUM AND 2.089 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.847 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN
•
TEMP RATING: -30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.047 INCHES MINIMUM AND 2.089 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.847 INCHES MINIMUM AND 1.877 INCHES MAXIMUM IN
TEMP RATING-30.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
ELONGATION PERCENTAGE125 MAXIMUM
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
27203Interchangeable
interchangeable cross-reference
interchangeable
27203DAInterchangeable
interchangeable cross-reference
interchangeable
MS9388-134Interchangeable
interchangeable cross-reference
interchangeable
XPG0261500044Interchangeable
interchangeable cross-reference
interchangeable
J221P134Interchangeable
interchangeable cross-reference
interchangeable
D80089-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-134 V747-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-134 V747-75?
2-134 V747-75 is a O-RING.
What parts can replace 2-134 V747-75?
There are 25 known substitutes for 2-134 V747-75: 27203, 27203DA, MS9388-134 and 22 more. Substitute compatibility should be verified for your specific system.
Is 2-134 V747-75 still available?
2-134 V747-75 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-134 V747-75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026