PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-113N552-90
2-113N552-90 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.742 INCHES MINIMUM AND 0.768 INCHES MAXIMUM IN, center_hole_diameter: 0.549 INCHES NOMINAL IN, elongation_percentage: 160 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-444-0849, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-113N552-90
NSN: 5331-00-444-0849
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter0.742 INCHES MINIMUM AND 0.768 INCHES MAXIMUM IN
center_hole_diameter0.549 INCHES NOMINAL IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-444-0849
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-113N552-90 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.549 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE DIAMETER: 0.742 INCHES MINIMUM AND 0.768 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.549 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
OUTSIDE DIAMETER0.742 INCHES MINIMUM AND 0.768 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE160 MAXIMUM
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
AS568-113Interchangeable
interchangeable cross-reference
interchangeable
J200AC113Interchangeable
interchangeable cross-reference
interchangeable
MPL-BHS-1000PC3Interchangeable
interchangeable cross-reference
interchangeable
011Interchangeable
interchangeable cross-reference
interchangeable
G-375-B-011SUAInterchangeable
interchangeable cross-reference
interchangeable
113-7509Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-113N552-90?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-113N552-90?
2-113N552-90 is a O-RING.
What parts can replace 2-113N552-90?
There are 24 known substitutes for 2-113N552-90: AS568-113, J200AC113, MPL-BHS-1000PC3 and 21 more. Substitute compatibility should be verified for your specific system.
Is 2-113N552-90 still available?
2-113N552-90 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-113N552-90

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026