PartsTable
Technical Data Sheet
PartsTable / O-RING / J200AC113
J200AC113 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, outside_diameter: 0.755 INCHES NOMINAL IN, center_hole_diameter: 0.542 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN, cross-sectional_height: 0.103 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-087-3767, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
J200AC113
NSN: 5331-00-087-3767
FSC: 5331 — O-RING
CAGE: 99657 — MAROTTA CONTROLS INC (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
outside_diameter0.755 INCHES NOMINAL IN
center_hole_diameter0.542 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
cross-sectional_height0.103 INCHES NOMINAL IN
NSN5331-00-087-3767
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: J200AC113 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.103 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.755 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.542 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.103 INCHES NOMINAL IN
OUTSIDE DIAMETER0.755 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.542 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
4KK513Interchangeable
interchangeable cross-reference
interchangeable
2-113N552-9Interchangeable
interchangeable cross-reference
interchangeable
PRP568-113-4200-70Interchangeable
interchangeable cross-reference
interchangeable
CI-0113Interchangeable
interchangeable cross-reference
interchangeable
13-0617-13Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-113CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy J200AC113?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is J200AC113?
J200AC113 is a O-RING.
What parts can replace J200AC113?
There are 18 known substitutes for J200AC113: 4KK513, 2-113N552-9, PRP568-113-4200-70 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for J200AC113?
J200AC113 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-087-3767. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — J200AC113

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026