PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-011V1164-75
2-011V1164-75 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN, center_hole_diameter: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-0975, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-011V1164-75
NSN: 5331-00-166-0975
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
center_hole_diameter0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV)
material_document_and_classificationAMS7276 ASSN STD SINGLE MATERIAL RESPONSE
NSN5331-00-166-0975
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-011V1164-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS7276 ASSN STD SINGLE MATERIAL RESPONSE
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS7276 ASSN STD SINGLE MATERIAL RESPONSE
ELONGATION PERCENTAGE125 MAXIMUM
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
C10096-0060-0013Interchangeable
interchangeable cross-reference
interchangeable
AS568-013Interchangeable
interchangeable cross-reference
interchangeable
AMS3303-013ESInterchangeable
interchangeable cross-reference
interchangeable
0011Interchangeable
interchangeable cross-reference
interchangeable
R149P216JInterchangeable
interchangeable cross-reference
interchangeable
4635-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-011V1164-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-011V1164-75?
2-011V1164-75 is a O-RING.
What parts can replace 2-011V1164-75?
There are 35 known substitutes for 2-011V1164-75: C10096-0060-0013, AS568-013, AMS3303-013ES and 32 more. Substitute compatibility should be verified for your specific system.
Is 2-011V1164-75 still available?
2-011V1164-75 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-011V1164-75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026