PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-010E515-80
2-010E515-80 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include end_item_identification: KC-46 AIRCRAFT, reference_number_differentiating_characteristics: ITEM IS FAA CERTIFIED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-676-6184, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-010E515-80
NSN: 5331-00-676-6184
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
end_item_identificationKC-46 AIRCRAFT
reference_number_differentiating_characteristicsITEM IS FAA CERTIFIED
NSN5331-00-676-6184
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-010E515-80 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER
•
MATERIAL DOCUMENT AND CLASSIFICATION: E515-8,FSCM 05779 MFR REF SINGLE MATERIAL RESPONSE
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
TEMP RATING: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER
MATERIAL DOCUMENT AND CLASSIFICATIONE515-8,FSCM 05779 MFR REF SINGLE MATERIAL RESPONSE
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
TEMP RATING-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
30504768PC13Interchangeable
interchangeable cross-reference
interchangeable
2-010E515-8Interchangeable
interchangeable cross-reference
interchangeable
ARP568-010E515- 8Interchangeable
interchangeable cross-reference
interchangeable
2-010/E515-80Interchangeable
interchangeable cross-reference
interchangeable
2509084Interchangeable
interchangeable cross-reference
interchangeable
2-010-E0540-80 1W2BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-010E515-80?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-010E515-80?
2-010E515-80 is a O-RING.
What parts can replace 2-010E515-80?
There are 18 known substitutes for 2-010E515-80: 30504768PC13, 2-010E515-8, ARP568-010E515- 8 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-010E515-80?
2-010E515-80 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-676-6184. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-010E515-80

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026