PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-010E515-8
2-010E515-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, center_hole_diameter: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-814-0722, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-010E515-8
NSN: 5331-00-814-0722
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL
outside_diameter0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
center_hole_diameter0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-814-0722
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-010E515-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE DIAMETER: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
OUTSIDE DIAMETER0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
4400481-0100Interchangeable
interchangeable cross-reference
interchangeable
9868P10Interchangeable
interchangeable cross-reference
interchangeable
2-010 C557-7Interchangeable
interchangeable cross-reference
interchangeable
2-010C147-70Interchangeable
interchangeable cross-reference
interchangeable
AS568A-010Interchangeable
interchangeable cross-reference
interchangeable
J-16387 PIECE 19Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-010E515-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-010E515-8?
2-010E515-8 is a O-RING.
What parts can replace 2-010E515-8?
There are 29 known substitutes for 2-010E515-8: 4400481-0100, 9868P10, 2-010 C557-7 and 26 more. Substitute compatibility should be verified for your specific system.
Is 2-010E515-8 still available?
2-010E515-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-010E515-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026