1PS84 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

1PS84: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include center_hole_diameter: 0.301 INCHES NOMINAL IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-066-2413, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1PS84

NSN: 5331-00-066-2413
NIINs: 000662413, 001138486
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

center_hole_diameter	0.301 INCHES NOMINAL IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-066-2413

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.504 INCHES NOMINAL IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

TEMP RATING	-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.504 INCHES NOMINAL IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 8

MS9608-012Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MS9068-012Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS3582Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

10117039Reference document

Same NSN cross-reference

Reference document — Informative reference only

S8057R7Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS9068-12Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 1PS84?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1PS84?

1PS84 is a O-RING.

What parts can replace 1PS84?

There are 8 known substitutes for 1PS84: MS9608-012, MS9068-012, SAE-AS3582 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 1PS84?

1PS84 is cataloged in the U.S. Government catalog under NSN 5331-00-066-2413. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1PS84 — O-RING

Request a Quote — 1PS84