10117039 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

10117039: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.504 INCHES NOMINAL IN, center_hole_diameter: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-066-2413, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

10117039

NSN: 5331-00-066-2413
FSC: 5331 — O-ring
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
temp_rating	-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.504 INCHES NOMINAL IN
center_hole_diameter	0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-066-2413

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.504 INCHES NOMINAL IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

TEMP RATING	-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.504 INCHES NOMINAL IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 8

MS9608-012Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MS9068-012Reference document

Same NSN cross-reference

Reference document — Secondary reference

1PS84Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

SAE-AS3582Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

S8057R7Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS9068-12Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 10117039?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10117039?

10117039 is a O-RING.

What parts can replace 10117039?

There are 8 known substitutes for 10117039: MS9608-012, MS9068-012, 1PS84 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 10117039?

10117039 is cataloged in the U.S. Government catalog under NSN 5331-00-066-2413. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10117039 — O-RING

Request a Quote — 10117039