PartsTable
Technical Data Sheet
Download PDF

1F414 — PIN,COTTER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1F414: PIN,COTTER.

The PIN,COTTER is a the manufacturer industrial component. Key specifications include duty_cycle: CONTINUOUS, temp_rating: 40.0 AMBIENT CELSIUS AND 50.0 OPERATING CELSIUS, power_rating: 7.5000 HORSEPOWER OUTPUT, winding_type: COMPOUND WOUND, overall_width: 17.875 INCHES IN, cooling_method: NATURAL CONVECTION VENTILATED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-013-7180, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1F414
NSN: 5315-00-013-7180
NIINs: 000137180, 005482839
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 89749 — CLARK MATERIAL HANDLING COMPANY (USA)
SPECIFICATIONS
duty_cycleCONTINUOUS
temp_rating40.0 AMBIENT CELSIUS AND 50.0 OPERATING CELSIUS
power_rating7.5000 HORSEPOWER OUTPUT
winding_typeCOMPOUND WOUND
overall_width17.875 INCHES IN
cooling_methodNATURAL CONVECTION VENTILATED
overall_height22.675 INCHES IN
overall_length23.187 INCHES IN
shaft_diameter1.4375 INCHES NOMINAL SINGLE END IN
mounting_methodFIXED BASE
enclosure_featureDRIPPROOF PROTECTED-45 DEG
features_providedVERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION
NSN5315-00-013-7180
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1F414 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STANDARD
•
DIAMETER: 0.125 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 2 CLASS OR 3 CLASS
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
UNDERLOOP LENGTH: 0.875 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSTANDARD
DIAMETER0.125 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATAB TYPE AND 2 CLASS OR 3 CLASS
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
UNDERLOOP LENGTH0.875 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
137180Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
7202657Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1F414?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1F414?
1F414 is a PIN,COTTER.
What parts can replace 1F414?
There are 2 known substitutes for 1F414: 137180, 7202657. Substitute compatibility should be verified for your specific system.
What is the NSN for 1F414?
1F414 is cataloged in the U.S. Government catalog under NSN 5315-00-013-7180. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1F414