PartsTable
Technical Data Sheet
Download PDF

137180 — PIN,COTTER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

137180: PIN,COTTER.

The PIN,COTTER is a the manufacturer industrial component. Key specifications include material: BRASS CASE, dial_size: 2-1/2 IN. DIA IN, bezel_type: THREAD, scale_name: CUBIC FEET AND PRESSURE, scale_type: MULTIPLE, scale_range: +0.0 TO 330.0 CUBIC FEET AND +0.0 TO 4000.0 POUNDS PRESSURE PER SQUARE INCH LBS.

This part is cataloged in the U.S. Government catalog under NSN 5315-00-013-7180, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
137180
NSN: 5315-00-013-7180
NIINs: 000137180, 002462362
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialBRASS CASE
dial_size2-1/2 IN. DIA IN
bezel_typeTHREAD
scale_nameCUBIC FEET AND PRESSURE
scale_typeMULTIPLE
scale_range+0.0 TO 330.0 CUBIC FEET AND +0.0 TO 4000.0 POUNDS PRESSURE PER SQUARE INCH LBS
pointer_typeINDICATING
adjustabilityNONADJUSTABLE
overall_depth1.200 INCHES NOMINAL IN
pointer_colorBLACK
actuation_typeBOURDON TUBE
scale_accuracy2 PCT MIDDLE 3RD OF RANGE,3 PCT REMAINDER
NSN5315-00-013-7180
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 137180 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STANDARD
•
DIAMETER: 0.125 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 2 CLASS OR 3 CLASS
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
UNDERLOOP LENGTH: 0.875 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSTANDARD
DIAMETER0.125 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATAB TYPE AND 2 CLASS OR 3 CLASS
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
UNDERLOOP LENGTH0.875 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
7202657Reference document
Same NSN cross-reference
Reference document — Secondary reference
1F414Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 137180?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 137180?
137180 is a PIN,COTTER.
What parts can replace 137180?
There are 2 known substitutes for 137180: 7202657, 1F414. Substitute compatibility should be verified for your specific system.
What is the NSN for 137180?
137180 is cataloged in the U.S. Government catalog under NSN 5315-00-013-7180. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 137180