PartsTable
Technical Data Sheet
PartsTable / O-RING / 19310P11
19310P11 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 0.732 INCHES MINIMUM AND 0.742 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-069-9128, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19310P11
NSN: 5331-00-069-9128
FSC: 5331 — O-RING
CAGE: 27618 — TAYLOR MACHINE WORKS INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter0.732 INCHES MINIMUM AND 0.742 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-069-9128
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 19310P11 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.732 INCHES MINIMUM AND 0.742 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.732 INCHES MINIMUM AND 0.742 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
A116Interchangeable
interchangeable cross-reference
interchangeable
BS4-1500PC11Interchangeable
interchangeable cross-reference
interchangeable
BS4-1499PC11Interchangeable
interchangeable cross-reference
interchangeable
11160Interchangeable
interchangeable cross-reference
interchangeable
323127Interchangeable
interchangeable cross-reference
interchangeable
A18-6FInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19310P11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19310P11?
19310P11 is a O-RING.
What parts can replace 19310P11?
There are 8 known substitutes for 19310P11: A116, BS4-1500PC11, BS4-1499PC11 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 19310P11?
19310P11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-069-9128. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19310P11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026