PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1914800
1914800 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, hole_diameter: 0.046 INCHES NOMINAL IN, thread_length: 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-275-6833, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1914800
NSN: 5305-00-275-6833
FSC: 5305
CAGE: 16764 — GENERAL MOTORS CORP DELCO REMY DIV (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
hole_diameter0.046 INCHES NOMINAL IN
hole_quantity1
thread_length0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
NSN5305-00-275-6833
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1914800 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
SCREW SURFACE TREATMENT: DICHROMATE ZINC
•
THREAD QUANTITY PER INCH: 32
•
FASTENER LENGTH: 0.359 INCHES NOMINAL IN
•
SCREW MATERIAL: STEEL COMP 1008
•
HEAD HEIGHT: 0.107 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNF
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.190 INCHES IN
SCREW SURFACE TREATMENTDICHROMATE ZINC
THREAD QUANTITY PER INCH32
FASTENER LENGTH0.359 INCHES NOMINAL IN
SCREW MATERIALSTEEL COMP 1008
HEAD HEIGHT0.107 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNF
SPECIAL FEATURESFULL DOG POINT
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
AN501A10-6Interchangeable
interchangeable cross-reference
interchangeable
57480-709Interchangeable
interchangeable cross-reference
interchangeable
15194Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1914800?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1914800?
1914800 is a SCREW,MACHINE.
What parts can replace 1914800?
There are 3 known substitutes for 1914800: AN501A10-6, 57480-709, 15194. Substitute compatibility should be verified for your specific system.
Is 1914800 still available?
1914800 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1914800

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026