PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN501A10-6
AN501A10-6 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, end_item_identification: AIRCRAFT PROPELLERS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-156-2717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN501A10-6
NSN: 5305-00-156-2717
FSC: 5305
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
head_styleFILLISTER
end_item_identificationAIRCRAFT PROPELLERS
NSN5305-00-156-2717
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AN501A10-6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
•
THREAD CLASS: 2A A
•
HEAD STYLE: FILLISTER
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNF
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS2A A
HEAD STYLEFILLISTER
NOMINAL THREAD DIAMETER0.190 INCHES IN
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
HEAD DIAMETER0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNF
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE
HEAD HOLE CONFIGURATION STYLEROUND
THREAD LENGTH0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
AN501A10-6Interchangeable
interchangeable cross-reference
interchangeable
57480-709Interchangeable
interchangeable cross-reference
interchangeable
15194Interchangeable
interchangeable cross-reference
interchangeable
B3840-6Interchangeable
interchangeable cross-reference
interchangeable
5305PL0963230Interchangeable
Same NIIN cross-reference
interchangeable
5305001562717Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN501A10-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN501A10-6?
AN501A10-6 is a SCREW,MACHINE.
What parts can replace AN501A10-6?
There are 7 known substitutes for AN501A10-6: AN501A10-6, 57480-709, 15194 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN501A10-6?
AN501A10-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-156-2717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN501A10-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026