PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 19-330
19-330 ✓ Verified by PartsTable
Trust · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Flat cable that does not tangle. Inline call-pickup button & microphone. For music & phone calls.

Soft rubber earplugs in 3 sizes. . Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: CAP, body_width: 2.375 INCHES NOMINAL IN, nut_height: 1.500 INCHES NOMINAL IN, blade_width: 3.0 MILLIMETERS NOMINAL MM, body_height: 2.562 INCHES NOMINAL IN.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-3237, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19-330
NSN: 3110-00-227-3237
FSC: 3110
CAGE: 28265 — HERCULES ENGINE CO INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleCAP
body_width2.375 INCHES NOMINAL IN
nut_height1.500 INCHES NOMINAL IN
blade_width3.0 MILLIMETERS NOMINAL MM
body_height2.562 INCHES NOMINAL IN
body_length2.750 INCHES NOMINAL IN
thread_class2A A
bore_diameter0.7509 INCHES MINIMUM AND 0.7518 INCHES MAXIMUM IN
overall_width1.650 INCHES MAXIMUM IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
thread_seriesUNS
NSN3110-00-227-3237
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 19-330 · Trust ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.7509 INCHES MINIMUM AND 0.7518 INCHES MAXIMUM IN
•
MATERIAL: STEEL ROLLER
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONAN-FPS-6B RADAR SET
RETAINER FABRICATION METHODPRESSED
ALIGNMENT TYPERIGID
SURFACE FINISHGROUND
OVERALL WIDTH0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.7509 INCHES MINIMUM AND 0.7518 INCHES MAXIMUM IN
MATERIALSTEEL ROLLER
OVERALL OUTSIDE DIAMETER1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
MATERIALSTEEL OUTER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
C69Interchangeable
interchangeable cross-reference
interchangeable
CB0812-10Interchangeable
interchangeable cross-reference
interchangeable
44-99-116-13Interchangeable
interchangeable cross-reference
interchangeable
7154Interchangeable
interchangeable cross-reference
interchangeable
12386Interchangeable
interchangeable cross-reference
interchangeable
122016Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19-330?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19-330?
19-330 is a SEMICONDUCTOR DEVICE,DIODE manufactured by Trust.
What parts can replace 19-330?
There are 23 known substitutes for 19-330: C69, CB0812-10, 44-99-116-13 and 20 more. Substitute compatibility should be verified for your specific system.
Is 19-330 still available?
19-330 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19-330

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026