PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 44-99-116-13
44-99-116-13 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FASTENER,PAWL is a the manufacturer industrial component. Key specifications include width: 0.875 INCHES NOMINAL IN, height: 1.750 INCHES NOMINAL IN, length: 1.266 INCHES NOMINAL IN, diameter: 1.375 INCHES NOMINAL IN, material: STEEL AND STEEL CORROSION RESISTING OVERALL, pawl_type: STRAIGHT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-070-2066, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
44-99-116-13
NSN: 5340-00-070-2066
FSC: 5340
CAGE: 94222 — SOUTHCO INC (USA)
SPECIFICATIONS
width0.875 INCHES NOMINAL IN
height1.750 INCHES NOMINAL IN
length1.266 INCHES NOMINAL IN
diameter1.375 INCHES NOMINAL IN
materialSTEEL AND STEEL CORROSION RESISTING OVERALL
pawl_typeSTRAIGHT
knob_length0.500 INCHES NOMINAL IN
pawl_swing_angle90.0 DEGREES NOMINAL
special_featuresHOLE QTY:2
style_designatorKNURLED
surface_treatmentZINC OVERALL
operational_directionRIGHT-HAND
NSN5340-00-070-2066
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 44-99-116-13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE DIAMETER: 0.193 INCHES NOMINAL IN
•
OPERATIONAL DIRECTION: RIGHT-HAND
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES: 1.250 INCHES NOMINAL IN
•
KNOB LENGTH: 0.500 INCHES NOMINAL IN
•
WIDTH: 0.875 INCHES NOMINAL IN
•
PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL AND STEEL CORROSION RESISTING OVERALL
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE DIAMETER0.193 INCHES NOMINAL IN
OPERATIONAL DIRECTIONRIGHT-HAND
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES1.250 INCHES NOMINAL IN
KNOB LENGTH0.500 INCHES NOMINAL IN
WIDTH0.875 INCHES NOMINAL IN
PAWL LENGTH FROM ACTUATING SHAFT CENTER TO PAWL END1.000 INCHES NOMINAL IN
MATERIALSTEEL AND STEEL CORROSION RESISTING OVERALL
SURFACE TREATMENTZINC OVERALL
STYLE DESIGNATORKNURLED
PAWL ACTUATION METHODKNOB
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
3238982Interchangeable
interchangeable cross-reference
interchangeable
HJ122016Interchangeable
interchangeable cross-reference
interchangeable
230-10018Interchangeable
interchangeable cross-reference
interchangeable
7154Interchangeable
interchangeable cross-reference
interchangeable
345D071G01Interchangeable
interchangeable cross-reference
interchangeable
Z634XInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 44-99-116-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 44-99-116-13?
44-99-116-13 is a FASTENER,PAWL.
What parts can replace 44-99-116-13?
There are 13 known substitutes for 44-99-116-13: 3238982, HJ122016, 230-10018 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 44-99-116-13?
44-99-116-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-070-2066. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 44-99-116-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026